In order to use this application you need to install Car Security Alarm Pro which is free.
Advantages of Car Security Alarm Pro Client: • Maintenance by using a shortcut key function, instead of typing the entire content of the text manually. • Automatically arm itself after you have departed the vehicle. • Message straight to the application screen • No commercials inside application
How to quickly launch the application and what you will need.
You will need two mobile phones with Android operating system (at least version 2.3.3). Both phones must have active SIM cards
1st Phone – this is the phone that will be kept in your vehicle out of sight 2nd Phone – this phone is your everyday phone which you have with you
Setting up the phones: 1. The phone which will be located in your vehicle (1st phone) needs to have Car Security Alarm Pro application installed on to it. (configuration details of the phone located in the vehicle can be found on the Car Security Alarm Pro application page) 2. The phone which you’re using everyday (2st phone) needs to have Car Security Alarm Pro Client application installed on to it. 3. In the application Settings, you firstly need to enable the service by clicking the check box until the green arrow shows. 4. Now go to the "Permitted phone number" field and enter the phone number of the 1st phone (the phone located in the vehicle) starting with the country prefix (eg. +441234567890 where ‘+44’ is a UK prefix) 5. Once configured, your client application is ready to use.
Manual arming the system: To arm the alarm, simply press the START button. From that point on, your car will be protected by our application.
Manual disarming the system: To disarm the alarm, just press the STOP button.
Automatic arming/disarming: 1. To use the automatic arming and disarming the alarm, firstly need to pair the mobile phones via Bluetooth (the one placed in the car and the one you’re using every day). 2. Once the process is done select in the "Permitted bluetooth device" previously paired phone that is located in the car (1st phone).
There can be many mobile phones that can arm/disarm the alarm (eg. husband and wife use the same car), then you should have on each a Car Security Alarm Pro Client installed, also you need to pair each mobile phone via Bluetooth with the one placed in vehicle. Then go to 1st phone (the one in vehicle) and choose in “Permitted bluetooth devices” field each phone that was previously paired (2nd phone, 3rd phone etc) Once you have configured automatic arming you don’t need to press anything, the alarm will automatically arm itself after you have departed the vehicle.
Addition Commands Other features includes: ALARM STATUS, RESET, SEND LOCATION, CALL ME BACK.
What is Car Security Alarm Pro ?
This application will transform your spare mobile phone into extra protection for your car. Install the Car Security Alarm Pro into your spare mobile phone and place it in your car out of view.
After activating Car Security Alarm Pro, you will be alerted if your vehicle is stolen or hit whilst your vehicle is stationery. It’s possible that Car Security Alarm Pro may even notify you if your car is vandalised or clamped (dependent on your mobile phone’s sensitivity).
If your vehicle is stolen, you will be kept informed about the current GPS position of the car. Car Security Alarm Pro will aid the police in tracking and recovering your vehicle by collecting additional details for the police. If the GPS signal will be stifled or lost, you will receive additional information that will help you to locate your vehicle via the nearest mask.
Application does not support DUAL SIM phones.
This application is not a replacement for your vehicle’s alarm. The Author of this application does not accept any liabilities or damages as a result of using this application, or as a result of ineffective or faulty operation of the application.