Discover

Topics

A2N Kernel Control for S8 S8+

A2N Kernel Control for S8 S8+ APK

A2N Kernel Control for S8 S8+ APK

3.9 $4.49ace2nutzer

High-End-App: optimize charging; battery; multitasking; speed up to S10 level !

What's A2N Kernel Control for S8 S8+ APK?

A2N Kernel Control for S8 S8+ is a app for Android, It's developed by ace2nutzer author.
First released on google play in 5 years ago and latest version released in 2 years ago.
This app has 645 download times on Google play and rated as 4.90 stars with 100 rated times.
This product is an app in Tools category. More infomartion of A2N Kernel Control for S8 S8+ on google play
This high-end-app will provide you unique special features never seen before !

### Supported S8 / S8+ Variants: ###
-- G950F
-- G950FD
-- G950N
-- G955F
-- G955FD
-- G955N

Note: works only with A2N Kernel.

### App Features ###

# Power
-- Charger Control
For faster charging. - Range: 100 - 3000 / 3500 mA (S8 / S8+)

-- Battery Informations
Like accepted charging current, input voltage, battery temperature and battery voltage.

-- Battery Care
E.g. stop charging at 95 % to reduce battery aging. - Range: 50 - 100 %
Battery IDLE feature, useful for DeX or gaming.
Set Max charging temperature. - Range: 30 - 45 °C

-- Battery Service
Shows charge cycles and ability to reset to 0.
Check real battery capacity in % / mAh and ability to reset. (battery gauge recalibration)

-- Disable (Buggy) Moisture Detection
Ability to disable moisture detection, for the case the USB and Jack-port is dry but you get still a moisture warning.

# Screen
-- Input Booster
Adjust touch boost CPU duration in ms, to improve scrolling.

# CPU
-- Overclock Control
BIG CPU: 741 - 2808 MHz* - default: 2314 MHz
LITTLE CPU: 455 - 2002 MHz* - default: 1690 MHz
Set Max Freq for screen OFF.
Ability to disable boost, for powersave.
Governor up_threshold, to adjust balance between performance and powersave.
BIG CPU DVFS Max Temp (thermal throttling)** - Range: 65 - 95 °C

# GPU
-- Overclock Control
260 - 839 MHz* - default: 546 MHz
Ability to disable boost, for powersave.
Governor up_threshold, to adjust balance between performance and powersave.
GPU DVFS Max Temp (thermal throttling)** - Range: 65 - 95 °C

* Max stable Freq depends on the quality of the SoC !
** To avoid too big performance drops from stock thermal throttling driver.

# Performance Profiles
-- Powersave
-- Balanced
-- Performance (Kernel Default)
-- Performance Plus (Gaming / OC) (Adjustable CPU / GPU Freq)

# RAM
-- Memory Management
Swap / zRam* - LZ4 compressed swap block-device in RAM - Choice: 0 - 100 % of RAM size
Adjust Swappiness.
Ability to drop caches / buffers, to free RAM.

* For multitasking, gaming, responsiveness and battery life.

# Network
Load kernel module for network file systems
SMB / CIFS V2 / V3
NFS V4.2
TCP Congestion Control - Choice: cubic, new reno, bic, westwood+, vegas, veno, hybla, etc..
Wi-Fi Band Selection, choice: "2.4 GHz / 5 GHz", "2.4 GHz only" or "5 GHz only".

# Misc
-- Torchlight Tuning
Increase brightness. - Range: 1 - 17 - Default Max is "10"
-- LED-RGB
Set blink ON / OFF delay for notifications / low battery.
Optimize RED, GREEN, BLUE LED - Increases brightness by disabling powersave mode on low lux.
-- Accelerometer Calibration

# File Systems
-- Load kernel module for F2FS and NTFS.

# Advanced Power Menu
Reboot to:
-- system
-- recovery
-- download
or:
-- shutdown
### END App Features ###

### Requirements ###
All the needed stuff you will find in my XDA thread or if you buy directly the app then it will redirect you to the proper thread.

### Like this app ? - Please rate and leave a short comment. ###

### Privacy ###
-- In case the app crashes it will send only technical debug info to the play store server, for debugging.

### CREDITS ###
-- World-gear-symbol by Freepik from www.flaticon.com - edited by ace2nutzer